240W/320W Harsh Environment Power Supply HEP-240/320

Introduction:

In order to meet the demands for high-grade AC/DC power supply -with low noise and has to operate under highly humid, highly dusty, highly oily, highly salty, ultra low or high temperature, heavily vibrating, high altitude and poor ventilation environment- MEAN WELL is pleased to unveil the 240W/320W ~HEP-240/320 series soon after launching HEP-100/150/185/600 series into the market.

These two power supply adopt aluminum case and the interior are fully potted with the heat-conducted silicone that equip both series with the IP65 high level protection against the ingress of dust and water (IP68 level optional models are also available) and the up to 10G anti-vibration capability. Moreover, they are able to work under the ambient temperature ranging between -55°C and +70°C by free air convection. To perfectly fit the industrial control applications running in harsh environment all over the world, such as outdoor telecommunication equipments, outdoor electronic signage and billboards, and petroleum plants or mine shaft facilities, HEP family must be your best choice!

Feature:

1. 90~305VAC full range input

2. Class I power unit (with FG)

3. Built-in active PFC function

4. High efficiency up to 94.5%

5. Fanless design, cooling by free air convection

6. Wide working temperature range : -55~+70°C

7. IP65 high protection level, IP68 optional model available

8. Meet 6KV surge immunity level (line to earth)

9. Withstand 10G vibration test

10. Operating altitude up to 5000 meters

11. Protections : Short circuit / Overload / Over voltage / Over temperature

12. Approvals : UL/CUL/CB/CE

13. Dimension (L x W x H) : HEP-240, 244.2 x 68 x 38.8mm; HEP-320, 252 x 90 x 43.8mm

14. 6 years warranty

Application:

65W Constant Current Output Metal Case LED Driver with PFC FDL-65 Series

Introduction:

MEAN WELL is pleased to unveil a new 65W constant current output mode LED driver ~ FDL-65 series which is equipped with built-in PFC function, complete protections and -40~+90℃ wide working temperature range (per case temperature). This series adopts metal case and is inner-potted with silicone that it is able to reach IP65 protection level and to withstand 5G vibration test. Further with the compact size design (151 x 53 x 31.5 mm only) and the working efficiency up to 90%, FDL-65 is very suitable for outdoor LED lighting luminaire applications, such as flood lighting, park lighting, wall-washer lighting and other architectural LED decorative lighting.

Feature:

1. Constant current output mode

2. 180~295VAC full range input

3. Built-in PFC function

4. High efficiency up to 90%

5. Low no load power consumption <0.5W

6. IP65 protection level

7. Working temperature:-40~+90℃ (case temperature)

8. Complete protection functions: Short circuit/ Over voltage/ Over temperature

9. Approvals: CCC/CE

10. Dimension (L x W x H): 151 x 53 x 31.5 mm

11. 3 years warranty

Application:

90~220W Class I AC-DC Green Medical Adaptor GSM90A/120A/160A/220A Series

Introduction:

MEAN WELL has completely launched the Class II household medical green adaptors which comply with the up-to-date energy efficiency regulations (EISA 2007 /DoE Level VI) —GSM06B~220B (rated 6~220W, respectively) product lines. In order to further satisfy the application demands for Class I (with FG) medical green adaptors, also following the energy efficiency regulations, used for terminal medical equipments or in public health service with higher output wattage, MEAN WELL is pleased to unveil the GSM90A (90W) / 120A (120W) / 160A (160W) / 220A (220W) series shortly after the GSM40A (40W) / 60A (60W) were released to the market.

These products all comply with the medical safety regulation IEC60601-1 3rd edition, possessing supreme characteristics such as 2 x MOPP (Means of Patient Protection) isolation level, the less than 100μA ultra low leakage current, the highest working efficiency up to 94.5% and the lower than 0.15W no load power consumption. Suitable applications include the medical equipments demanding the low leakage current, mobile clinical workstations, electric medical beds, portable oxygen concentrator, medical-use displays, biomedical examination devices, or those electrical systems in the need of low no load power consumption.

Feature:
1. 80~264VAC input
2. Built-in active PFC function
3. Ultra low no load power consumption <0.15W
4. Ultra low leakage current <100μA
5. Highest working efficiency up to 94.5%
6. Comply with the up-to-date global energy efficiency (EISA 2007/DoE Level VI), NRCan, AU/NZ MEPS,
    EU ErP and CoC Version 5
7. Exploit IEC320-C14 AC inlet (Class I, with FG)
8. 94V-0 flame retardant plastic case
9. Working temperature :-30~+70℃
10. Complete protections : Short circuit / Overload / Over voltage / Over temperature
11. Equipped with LED indicator
12. Approvals: UL/CUL/TUV/CB/FCC/CE
13. Dimension (L x W x H) : — 90W：145 x 60 x 32 mm, 120W：167 x 67 x 35 mm,                                                                                  160W：175 x 72 x 35 mm, 220W：210 x 85 x 46 mm
14. 3 years warranty

Application:

240W/320W 180~528VAC High Voltage Input LED Power Supply HVG/HVGC-240/320

Introduction:

HVG/HVGC, MEAN WELL high voltage input 180~528VAC LED power supply family, presently comprises 65W (HVG/HVGC-65), 100W (HVG/HVGC-100) and 150W (HVG/HVGC-150). MEAN WELL is now introducing four new waterproof LED power supply series at the same time- 240W HVG/HVGC-240 and 320W HVG/HVGC-320- in response to the growing worldwide market potential for the larger scale LED luminaire design adopting the high input voltage (in the areas such as North America, certain countries or districts in the lack of stable AC voltage, or those applications using generator as the power source, the high input voltage 277VAC/347VAC/400VAC/480VAC is frequently utilized.)

Following the current HVG/HVGC product design concept, HVG/HVGC-240 and HVG/HVGC-320 exploit metal housing, providing the IP protection level and options for output and dimming function mostly demanded by the industry. These series perfectly suit the LED lighting applications such as high bay lighting, fishing lamp, greenhouse lighting, stadium lighting, etc. 5 years warranty is provided for these 4 series. For the detailed information, please refer to the Feature as follows.

Feature:

1. Wide input range 180~528VAC

2. Built-in active PFC function

3. Product comparison:

Application:

75W Constant Voltage and Constant Current Output/ Constant Current Output LED Power Supply with PFC ELG-75 Series

Introduction:

Since the 100W/150W LED power supply with PFC—ELG-100/ELG-150 series (C.V.+C.C. output) and the ELG-100-C/ELG-150-C series (C.C. output) were released to the market, MEAN WELL has received extraordinarily positive responses from LED lighting market. In order to meet the application requirements of the power supply with smaller power rating, MEAN WELL extends the output wattage of ELG family down to 75W, introducing the ELG-75 (C.V.+C.C. output)/ELG-75-C (C.C. output) series.

The design of these two series is consistent with the ELG family in mass production, providing various models and also diversified LED dimming function options (e.g. 3 in 1 dimming function, smart timer dimming function, DALI function, etc.) that is perfectly suitable to be applied to the luminaire applications such as LED street lighting, LED harbor lighting, LED bay lighting, LED flood lighting, and so on.

Feature:

1. 180~295VAC input

2. ELG-75: Constant Voltage (C.V.) + Constant Current (C.C.) output, ELG-75-C Constant Current (C.C.) output

3. Built-in active PFC function

4. High efficiency up to 91%

5. Working temperature (case temperature): -40~+85°C

6. Protections: Short circuit / Over current (ELG-75 only) / Over voltage / Over temperature

7. Comply with harmonic current limit per EN61000-3-2 Class C (≧50% load)

8. Meet 6kV surge immunity level (EN61000-4-5)

9. Approvals: UL / CUL / ENEC / CB / CE

10. Type “HL” for use in class I, Division 2 hazardous (Classified) location luminaires

11. Metal case, dimension ( L x W x H ): 180 x 63 x 35.5mm

12. 5 years warranty

Application:

200W Miniature Green Open Frame Type Industrial Power Supply EPP-200 Series

Introduction:

Soon after MEAN WELL announced the new generation miniature open frame type power supply ~EPS-45~120 series, in order to expand the product family and to further meet the long-term demands for energy saving and miniaturization of higher wattage open frame type power supply for IT and industrial related application markets; it is pleasing to unveil the new EPP-200 series which is pushing upward the output power to 200W on top of the original 4” x 2 “ footprint.

The features of this product are not only the miniature size, ultra low no load power consumption (<0.5W) and less-than-1U low profile design (only 29mm high) but also the outstanding anti-interference ability delivering EMI Class B for both Class I (with FG) and Class II (no FG) installation requirements of terminal end systems that it is well suitable for various power enclosures (such as plastic or metal) applications installed inside the system cabinets. Suitable applications include industrial electric equipments, electro-mechanical instruments, factory automation systems, or electronic devices which demand low no load power consumption.

Feature:
1. 4” x 2” miniature PCB size
2. 80~264VAC full range input
3. Built-in PFC function
4. High efficiency up to 94%
5. Working temperature:-30~+70℃
6. Complete protection functions: Short circuit/Overload/Over voltage/Over temperature
7. Cooling by free air convection for 140W and 200W with 10CFM forced air
8. Built-in 12Vdc/0.5A fan supply
9. Approved for UL/CUL/TUV/CB/CE
10. LED indicator for power on
11. Dimension (L x W x H): 101.6 x 50.8 x 29 mm
12. 3 years warranty

Application:

Meanwell led driver HLG-320H-C dimming and waterproof led driver IP67 with 7 years warranty

Introduction:

MEAN WELL HLG-C family is the most outstanding models of constant current and high voltage output LED drivers in the LED lighting industry. There have been the 70W(HLG-60H-C) / 90W(HLG-80H-C) / 150W(HLG-120H-C) / 200W(HLG-185H-C) / 250W(HLG-240H-C) series introduced to the market. Since the demand for LED lighting applications adopting the design of high-voltage single route with LEDs connected in series continues growing, MEAN WELL is pleased to unveil the new 320W~HLG-320H-C series in order to meet the need for large scale lighting system requiring high power with high-voltage output. 

HLG-320H-C follows the high performance and high reliability design of the HLG-C family and offers 7 years warranty. The whole series provides various models equipped with different dimming functions, like adjustable Io value, 3 in 1 dimming function, DALI dimming function, smart timer dimming function, etc. (please refer to the table under Order Information) that it is very suitable for LED street lighting, LED fishing lamp, LED harbor lighting, LED greenhouse lighting, LED high bay lighting, and so on.

Feature: 
1.90~305VAC full range input
2. Constant Current (C.C.) output
3. Built-in active PFC function
4. High efficiency up to 94%
5. Working temperature: -40~+85℃ (case temperature)
6. Protections: Short circuit / Over voltage / Over temperature
7. Comply with harmonic current limit per EN61000-3-2 Class C (≧50% load)
8. Approvals: UL/CUL/ENEC/CB/CE
9. Type “HL” for use in Class I, Division 2 hazardous (Classified) location luminaires
10. Metal case, dimension ( L x W x H ): 252 x 90 x 43.8 mm
11. 7 years warranty

Application:

40W/60W Multiple-stage Constant Current Output LED Driver LCM-40U(DA) and LCM-60U(DA)

Indutroduction:

LCM-40(DA)/60(DA), the 180~295VAC input LED drivers of MEAN WELL have received outstanding market feedback since being released to the market. In order to fulfill the requirements of countries or areas which accept 115VAC input, MEAN WELL is pleased to unveil the LCM-40U(DA)/60U(DA) series which accept 90~132VAC input.

The enclosure design and the output specification of these two products all follow the LCM-40(DA)/60(DA) series, complying with UL8750 safety regulations, adopting constant current (C.C.) output mode, flexibly switching different output current levels by the built-in DIP switch; adopting rectangular low profile (23mm) plastic case, the I/O connections are on the same side, which allow system designers a more convenient wiring installation within limited space; with the built-in temperature compensation function, by connecting an external temperature sensor (NTC resistor) between the NTC+/- terminals the output current could be correspondingly changed with the detected temperature to ensure the long lifetime of LED lighting luminaires. In addition, they are equipped with synchronization dimming function that 10 drivers (max.) can be operated synchronously to make consistent the dimming control signal of LED lighting systems with multiple drivers.

The basic models, LCM-40U/60U, are designed with built-in 3-in-1 dimming function (0~10VDC, PWM signal or resistance), while the digital control models, LCM-40UDA/60UDA, are embedded with DALI interface and push dimming function which is in compliance with IEC62386-101, 102, 207 norms per DALI lighting control systems so as to meet the increasing dimming demands for intelligent control applications from LED lighting market.

Feature:
1. 90~132VAC input only
2. Class II design, no F.G.
3. Built-in synchronization dimming function up to 10 units
4. Working temperature—LCM-40U(DA)：-30~+90℃, LCM-60U(DA)：-30~+90℃ (case temperature)
5. Comply with UL/CUL/FCC approvals
6. Dimension (L x W x H): 123.5 x 81.5 x 23 mm
7. 3 years warranty

Application: